News for hackers. Stuff that matters.
Re:3D Printed Revolver by jacquesm on Thursday November 26, 2015 @09:44PM (#10635597)
I think one of the reasons is that using a drill press and a metal file require some skill whereas it takes much less skill to download a design and hit 'print'. Even so the quality of low cost 3D printer printed objects is such that you'll definitely need that file (and maybe even that drill press) so from that point of view not much has been gained.

Substituting plastic for metal in a gun is a great way to lose a couple of fingers or an eyeball too.

Re:3D Printed Revolver by ams6110 on Thursday November 26, 2015 @11:20PM (#10635832)
We used to teach middle schoolers to use such tools. It was a class called "shop" or maybe "industrial arts." Who ever thought they might be used to make a gun. Oh wait -- that was the project of one of the kids in my shop class, ca. 1979.
Re:3D Printed Revolver by jacquesm on Thursday November 26, 2015 @11:26PM (#10635848)
Yep. All knowledge is 'dual use', and metal working skills more so than most.
Re:3D Printed Revolver by nickpinkston on Thursday November 26, 2015 @09:56PM (#10635621)
Yea, totally, but this all assumes you can get ammo too. That's way harder than making a gun.

Maybe a 3D printed taser would actually be more accessible?

Re:3D Printed Revolver by duncan_bayne on Thursday November 26, 2015 @10:10PM (#10635659)
Given the amount of energy in a typical smartphone battery, I've wondered about making some sort of replacement back, loaded with supercapacitors and a couple of contacts, so the entire phone could double as a stun-gun ...
Re:3D Printed Revolver by jacquesm on Thursday November 26, 2015 @10:13PM (#10635666)
With a little bit of creative re-wiring it might even double as a grenade.
Re:3D Printed Revolver by duncan_bayne on Thursday November 26, 2015 @10:22PM (#10635688)
Hah! My wife owns one of the Samsung S3s with the 'swelling battery' problem; those things are almost grenades out of the box :)
Re:3D Printed Revolver by jacquesm on Thursday November 26, 2015 @10:25PM (#10635695)
People really underestimate the potency of a cell phone battery. It always makes me laugh how the airline security check will confiscate bottles with baby milk and water but lets through a couple of hundred high energy batteries without a problem (laptops, cellphones, tablets). Now what could a creative terrorist do with a few phone batteries and some wire. Might even be enough to burn through the cockpit door of an airliner.
Re:3D Printed Revolver by TeMPOraL on Thursday November 26, 2015 @10:58PM (#10635778)
Two things:

1. Don't give them ideas. I have a bunch of LiPols I want to get back home with next week.

2. I've heard and repeated that fact, but come to think of it it still makes me wonder - do hand grenades really have so little energy?

Re:3D Printed Revolver by jacquesm on Thursday November 26, 2015 @11:01PM (#10635783)
The trick of a grenade is not the amount of energy that it packs, it is the duration over which it releases that energy.

Compare with a balloon. You blow it up with a little bit over atmospheric pressure over a large amount of time. But when you puncture the balloon all the energy is released over a very short amount of time.

This is also why relatively harmless firecrackers become a lot more violent when you constrain them using duct tape or some fracturable container.

Re:3D Printed Revolver by duncan_bayne on Thursday November 26, 2015 @11:44PM (#10635890)
Re:3D Printed Revolver by TeMPOraL on Thursday November 26, 2015 @11:48PM (#10635896)
Thanks, didn't know that word before!
Re:3D Printed Revolver by duncan_bayne on Thursday November 26, 2015 @10:35PM (#10635720)
I don't know about that, but you could probably make some sort of thermite-phone, with a flammable body ignited by the energy in the battery. If done carefully, you could possibly have the thing behave like a fully functional phone until ignited. Doubt it'd bring down an airliner but it'd cause no end of panic and chaos onboard.
Re:3D Printed Revolver by jacquesm on Thursday November 26, 2015 @11:09PM (#10635807)
Being somewhat practical oriented I've half a mind to try to see what kind of a 'bang' one could get out of a cellphone or laptop battery but I have two worries: the first that it will succeed, the second that it will succeed a bit too well resulting in people no longer being allowed to bring laptops and cellphones on board of airliners and I have enough enemies as it is ;)

It's strange that nobody tried this to date (or at least, I can't find any hard evidence about people trying to blow stuff up with cell phone or laptop batteries).

Re:3D Printed Revolver by duncan_bayne on Thursday November 26, 2015 @11:24PM (#10635844)
A fully charged 1000mAH 3.7V battery contains ~ 13kJ of energy. One gram of TNT gives you ~4kJ. So at best - assuming you had some way of efficiently exploding a smartphone battery - you'd get a couple grams of TNT yield.

I suspect shocking, burning or smoking would be a better route to weaponising a smartphone.

Edited: for comparison, the muzzle energy for a .50BMG round is ~15Kj. Bearing in mind you get ~4kJ from a gram of TNT, this explains why being shot hurts so much :)

Re:3D Printed Revolver by jacquesm on Thursday November 26, 2015 @11:33PM (#10635862)
Laptop batteries do 200-400 Kj, that's 50 to 100 grammes of TNT.

I'm not sure how much damage one could do with 100 grammes of TNT but surely you could find more than just one laptop battery to work with.

Working grenades use anywhere from 50 grammes or more of TNT filler. The damage would very much depend on how fast you can liberate that energy and how well you could focus the blast.

Re:3D Printed Revolver by jsmeaton on Thursday November 26, 2015 @10:52PM (#10635762)
At least a few of you are currently being added to the no fly list.

Also, relevant https://xkcd.com/651/

Re:3D Printed Revolver by jacquesm on Thursday November 26, 2015 @10:55PM (#10635771)
> At least a few of you are currently being added to the no fly list.

As long as they don't add me to the 'no drive list' I'm fine with that.

> Also, relevant https://xkcd.com/651/

That's pretty much word-for-word, funny!

Re:3D Printed Revolver by duncan_bayne on Thursday November 26, 2015 @11:45PM (#10635893)
I should have been added to that after I broke a light aircraft learning how to land them ;)