News for hackers. Stuff that matters.
Re:The Invention of the Wah-Wah pedal by kazinator on Thursday November 05, 2015 @07:58PM (#10517241)
> Plunkett realized that he could replace this pricey switch with a potentiometer -- essentially an adjustable knob that divided voltages and acts as a variable resistor -- and achieve the same effect. “The switches were very expensive -- about $4 each,” Plunkett continues. “The potentiometer would only cost about 30 cents.”

Maybe he's talking about a rotary switch coupled to numerous external components? Such a thing has tonal virtues: you can switch paths that have different L, C and R values.

But, no; it's just described a simple switch:

> This switch, invented by British engineer Dick Denney and installed on all Vox AC-100 amps at the time, stood for “middle range boost.” When flicked on, it would highlight the middle sound frequencies of the guitar (notes between 300 and 5,000 hertz); in doing so, it would tame the extremes (very high and very low pitches), and produce a flattened, smoother sound.

It seems like nonsense that some at most DPDT switch would cost $4 versus a potentiometer at $0.30. Not for equal quality.

Maybe someone can shed some light on this?

Re:The Invention of the Wah-Wah pedal by TheOtherHobbes on Thursday November 05, 2015 @09:14PM (#10517487)
Good switches have always been expensive, possibly because they have a lot of small moving metal parts.

Pots are made with lower mechanical tolerances and are easier to build, so they're usually cheaper.

Re:The Invention of the Wah-Wah pedal by femto on Thursday November 05, 2015 @08:26PM (#10517328)
The circuit and a photo of the MRB control is here:

http://www.voxshowroom.com/us/amp/RG_FSconnectors.html

It seems to be a rotary switch. I can believe that the pot had a significantly lower unit price than the switch, especially if the amp used lots of pots and only one rotary switch, or if the rotary switch was custom made.

Re:The Invention of the Wah-Wah pedal by nutate on Thursday November 05, 2015 @08:36PM (#10517356)
Yeah tried to mention that in my comment. You were switching between 3 physical caps, but the transistor(s) in the wah circuit let you use a potentiometer to alter the way the cap reacts in the circuit by reducing the sheer number of electrons that even get stuck on it.