News for hackers. Stuff that matters.
Re:A $99.99 Surfboard Upends the Industry by pbrb on Friday October 30, 2015 @09:36AM (#10477661)
anecdotal, but here's my viewpoint as a surfer. yes, wavestorms sell like crazy, and are the #1 board i recommend to beginners. even ordering one at $180 w/ shipping can be cheaper than buying another decent used beginner board. so yeah, in that segment of the market, wavestorm is killing it.

once you're beyond the beginner stage, outside of small wave or 'fun' sessions, a wavestorm is the last thing you're going to want to surf. a 'hard' surfboard (fiberglass w/ epoxy or poly resin) is pretty much mandatory. the lowest cost 'hard' surfboards are 'pop-outs', made in overseas factories (think ~$300 for a shortboard). these are generally frowned upon by surfers. what surfers really want, and usually buy multiples of, are hand shaped 'hard' boards from local shapers or a couple bigger name brands that still mass produce surfboards, but at a higher price and quality point than the overseas pop-outs ($400-$1000+ depending on size, shaper, color, etc). wave storm is killing it, and definitely disrupted the soft top beginner market. selling through costco with their return policy was probably a very large part of their success too. though, there definitely still is a very large market for performance surfboards in the ~$500 and up range.

Re:A $99.99 Surfboard Upends the Industry by petra on Friday October 30, 2015 @10:02AM (#10477834)
What's wrong with the overseas made boards?
Re:A $99.99 Surfboard Upends the Industry by ndaiger on Friday October 30, 2015 @11:34AM (#10478431)
Like other small subcultures appropriated for their "cool factor" by the mainstream, there is a lot of internal policing for poseurs: people who don't know or care about the values or history of the subculture, and cheapen it by wearing it as a disposable signifier.

This particularly matters in surfing, where a crowded wave is frustrating and dangerous. It's annoying when some dumb dickhead who doesn't know what he's doing (and doesn't care to learn) ruins a wave and endangers your life.

Buying a board hand-shaped by a local shaper indicates a knowledge of the community and a commitment to its values. Shapers are generally making boards because they are obsessed with surfing their local breaks and have spent years or decades honing their craft. They live for surfing and their surf community. They do not, as a rule, get rich.

One easy way to spot poseurs is by the board they ride.

Beyond the cultural reasons, hand-shaped boards by long-time shapers tend to be:

- better made

- more interesting

- more beautiful

- particularly suited to the breaks that shaper surfs (and where their customers surf)

- most importantly, support the people most committed to the sport and its values

They're making boards for the love of surfing, not for a profit motive.

But mostly it's so people know you're not a poseur.

Re:A $99.99 Surfboard Upends the Industry by stdbrouw on Friday October 30, 2015 @11:52AM (#10478541)
So is it about making sure nobody dies or about not cheapening the subculture? Because those are two very different things. And if the latter, the dickheads might be those who use the purchase of expensive handmade gear as an exclusionary mechanism.
Re:A $99.99 Surfboard Upends the Industry by fricken4 on Friday October 30, 2015 @12:25PM (#10478761)
Surfing is plenty exclusionary. whether or not this is a bad thing, there are a finite number of decent breaks in the world. You can go to the ends of the earth, paddle out an hour before the sun is up, and there are already 20 guys in the water trying to catch the same wave.

If you're a kook with a $100 soft top the others will work together to keep you at the back of the lineup. Whether it's a matter of safety or subculture is besides the point, dedicated surfers don't want you around.

Surfers have no inclination to promote surfing unless they have some kind of sponsorship. Promotion is a corporate venture that has nothing to do with surfing and everything to do with making money. Mo money, mo problems.

Re:A $99.99 Surfboard Upends the Industry by spaceflunky on Saturday October 31, 2015 @12:05AM (#10481755)
The whole "safety" issue is a bit of red herring, used to just keep surfing exclusionary and to accuse others of malfeasance if they get in someone's way.

The serious risks in surfing are relatively low provided you're at a sandy bottom beach break with waves under 5ft. No one is taking these soft-top boards to the Pipeline and endangering lives, they're mostly just showing up at mellow low-risk breaks.

Yeah it's annoying when someone bumps into you, and yeah you might get a bruise in the worst case scenario, but no one is dying or drowning in 3ft waves because of too many surfers.

Re:A $99.99 Surfboard Upends the Industry by pbrb on Friday October 30, 2015 @01:49PM (#10479312)
> the dickheads might be those who use the purchase of expensive handmade gear as an exclusionary mechanism

haha, you pretty much hit the nail on the head here. surfing is really bizarre. when you start out, the guys who are better and probably have more expensive boards are the dick heads in your mind. when you get better, you slowly become one of the dickheads, and of course, you're not a dickhead, so the other guys who you once were become the dickheads in your mind.

i personally try to keep it at a balance... i'll help new ppl out, won't freak out on anyone in the water, tell a new surfer to go if they're in better position, etc. that said, i will burn you (snake you or back paddle) if you've missed a couple takes offs and we're going for the same wave as long as it's not a critical take off or anything like that.. i know, i know, shitty thing to do. though, i don't discriminate based on board type in these situations. i don't care if you're on a foam board, pop-out, or custom shape. i'm just kind of a greedy asshole like most dickhead surfers from the perspective of beginner surfers.

so i guess to answer your question, it is about making sure nobody dies, but is less about cheapening the subculture and more about serious surfers getting serious with their equipment. people do go gear head with surfboards, and that can be used by some people to show perceived hierarchy in the surf ecosystem, but like the other guy said, most people surf handmade boards because they are of higher quality and you work with the shaper to come up with a shape that works for you - your style of surfing, how you want to board to surf, the waves you will surf the board in, your weight, your height, design or artwork, etc. there's really nothing better than picking up a custom stick from a guy who you know made it by hand for you, and often, you can get a custom board from a shaper for roughly the same if not less than the heavily marketed big name brand but still not total pop-out companies (the ~$500 high performance boards i mentioned earlier).

Re:A $99.99 Surfboard Upends the Industry by ndaiger on Friday October 30, 2015 @05:43PM (#10480716)
That's a whole other problem with surfing!

Surfing regularly is a terrible hobby. Time-consuming, expensive, cold (depending on location). Wetsuits are annoying. Waves are crowded. People are jerks. People are dangerous. The ocean is dangerous. Injuries are fairly common.

In a two-hour session that starts just before first light (waking up at 4:30am in summer) I maybe get 5-10 decent waves to myself that last a minute, maybe two.

The fact that people still do it tells you just how amazing it feels to ride a wave.

Re:A $99.99 Surfboard Upends the Industry by petra on Friday October 30, 2015 @12:45PM (#10478900)
So i'm just throwing ideas here - if we find some cheaper way to verify people have the skills/knowledge (maybe some sort of a test) and they can signify that in some way - surfers will accept them ?
Re:A $99.99 Surfboard Upends the Industry by milesftl on Friday October 30, 2015 @01:20PM (#10479111)
I think the person you are replying to is correct but the emphasis is rarely on the board someone rides alone. Is just a way a lot of people are going to judge a person before they are out on the water. I will judge the hell out of someone I see walking on the beach with a super shitty board shape, but if they paddle out and rip then my predisposition obviously lead to an incorrect assumption. The most apt comparison I can come up with is a musician judging someone based on the quality of someone else's instrument.

I guess my point is there really is not a problem to be solved by making a cheaper board (other then the economic/business reasons obv). The simple fact of the matter is very few regular surfers will own these boards, and mostly kooks will buy them. However, that is not to say either set of skill levels of surfers, and which boards they own, are mutually exclusive.

Re:A $99.99 Surfboard Upends the Industry by gonzo on Saturday October 31, 2015 @03:30AM (#10482104)
People know you're not a poseur by how you act in the line-up, and how you surf.
Re:A $99.99 Surfboard Upends the Industry by mr_luc on Friday October 30, 2015 @11:19AM (#10478340)
Surfer here, spent 7 years in remote coastal south america surfing fairly regularly.

It's not that they're made overseas -- it's that the basic method of manufacture he mentioned, "pop-out", in the industry implies using a plastic shell and then pumping foam into it, and a few other similar methods of manufacture.

For shortboards, it's pretty terrible. The boards are very heavy for a surfboard, with poor rigidity and flex, and in fact they don't even attempt to target the "real shortboard" market, where extreme light weight, stiffness and a very delicately balanced flex work together to form something that lets you nimbly glide along a decent-sized wave on a board slightly shorter than you are.

Basically, the best form of manufacture for surfboards is a core of either high-quality rigid foam (not the heavy, flexible foam used in wavestorm/some pop-outs) or air, covered in substances like fiberglass and/or carbon-fiber fabric and minimal amounts of epoxies (sometimes using the same vacuum techniques as other carbon-fiber manufacturing to minimize weight). I said 'foam or air' because for a while people have been predicting that we'd move to hollow carbon-fiber boards, and there are/have been some of those boards, but they have their drawbacks and are often expensive.

Can performance surfboards be disrupted? It's already happened, to a certain extent. Channel Islands and other surfboard brands use automated milling of the foam blanks, and other automated processes as well.

Too, any overseas contenders have to worry about shipping. Surfboards are huge -- you could fit 20 boxed iphones in the footprint of a single boxed shortboard. At the price points mentioned ($300-$500), overseas shipping would probably eat into your margin. Shipping is even an issue for domestic producers; often shipping a board halfway across the country can cost $50-$100. Which is a nice bit of extra margin for a local shaper and his customers.

When will good surfboards get cheap? Probably when great carbon-fiber bikes get cheap, ie, when carbon-fiber manufacture is so well mastered by man that designs in any shape can be pumped out like Lego.

Re:A $99.99 Surfboard Upends the Industry by petra on Friday October 30, 2015 @12:40PM (#10478866)
>> Can performance surfboards be disrupted?

What about mid-level(those you graduate after wavestorm) - being manufactured in mexico via automated processes , using wavestorm like brand for cheap marketing , and being sold in costco ?

Re:A $99.99 Surfboard Upends the Industry by mr_luc on Friday October 30, 2015 @07:39PM (#10481197)
Another point is that in disrupting cheap performance shortboards, you're now in competition with the used market on craigslist.

Surfers making a conscientious effort to improve their performance -- bigger waves, steeper drops -- are going to break or otherwise 'use up' at least one board per good season. Given that, a lot of people would rather buy a used CI board that has had a small repair, or some minor dimpling, for $200-350, and then surf as hard as they can, and if it breaks it breaks.

... okay, that's just what I do. But Craigslist has made the used market a force to be reckoned with!

Re:A $99.99 Surfboard Upends the Industry by milesftl on Friday October 30, 2015 @01:27PM (#10479172)
they probably could be, they make these types of pop out boards in china now. I honestly dont know if they could ever be sold in a big box retailer type store only because of the margins/shelf space required for them. If everything made sense business wise I see 0 reason as to why this could not happen in the near future.

The one thing that I am not sure anyone has brought up, is this is a relatively small market. You are talking about big box stores, along the coasts of tourist rich surfing areas.

Re:A $99.99 Surfboard Upends the Industry by eru on Sunday November 01, 2015 @10:43AM (#10486725)
By the way, Lego is not cheap. They have insanely small allowed tolerances for the original Lego.
Re:A $99.99 Surfboard Upends the Industry by gonzo on Saturday October 31, 2015 @03:37AM (#10482116)
LEGO-like surfaces are more difficult to make than you might appreciate. (Smallworks.com)
Re:A $99.99 Surfboard Upends the Industry by matwood on Friday October 30, 2015 @11:21AM (#10478349)
After my first few used boards when I was learning, all my subsequent boards have been custom made to my specifications. Each board has unique characteristics that make it fit wave and wind conditions. Popouts can fill the need for a certain board, but when in certain challenging conditions I want _my_ board(s).