News for hackers. Stuff that matters.
Re:Netflix Switch – dim lights, turn on the TV, order food, ... by chrissnell on Monday September 28, 2015 @01:14AM (#10289016)
Any ideas what they might be using to mill the wooden enclosure? I have a few projects that need enclosures and it's been a few years since I looked but the CNC mills were still thousands of dollars.
Re:Netflix Switch – dim lights, turn on the TV, order food, ... by DannyBee on Monday September 28, 2015 @02:11AM (#10289140)
Why do you believe that wooden enclosure needs a CNC mill?

It requires a few miter cuts and a good chamfer bit.

That's it.

Heck, you could do it with all handtools pretty darn quickly.

(If for some reason, you really want to CNC mill it, and are in the bay area, contact me and i'll mill it on my CNC mill for you)

Re:Netflix Switch – dim lights, turn on the TV, order food, ... by reportingsjr on Monday September 28, 2015 @01:21AM (#10289030)
You could just use regular woodworking tools to get it done.

If you really want to CNC mill something like that then maybe look at the inventables x carve.[0] I got to use a shapeoko for a while which was the previous inventables CNC and it was pretty OK.

I would highly recommend looking in your area for a hackerspace that may have tools like these.

[0] https://www.inventables.com/technologies/x-carve

Re:Netflix Switch – dim lights, turn on the TV, order food, ... by barrecan on Monday September 28, 2015 @01:22AM (#10289032)
CNC would be one of the better routes. Like you mentioned, the cost is a barrier. Luckily you can rent CNC time at some hardware stores, university wood shops and some local hacker-spaces. http://100kgarages.com/ can locate you a CNC and answer any questions you may have.