Re:Examining the core memory module inside a vintage IBM 140...
by chiph on Sunday August 30, 2015 @08:21PM
(#10144875)
The first system I worked on in the USAF had 512 bytes of core memory¹. But it only used 320 of them, as the system was hard-coded to 80-columns (for both punch-card and printer). Since it was fully duplex, it had 2 send and 2 receive buffers of 80 characters each. It would flip the role of the buffers as they became full or empty.
I once had to replace the core memory array when one bit went bad. By pure bad luck, it was in one of the first few columns where the end-of-message sequence was expected, and the bad ferrite meant the system got hung up waiting for an EOM that was never detected. Bad donut. No message. ;/
I once had to replace the core memory array when one bit went bad. By pure bad luck, it was in one of the first few columns where the end-of-message sequence was expected, and the bad ferrite meant the system got hung up waiting for an EOM that was never detected. Bad donut. No message. ;/
¹ https://c1.staticflickr.com/1/40/109018526_8edb26b499_b.jpg