News for hackers. Stuff that matters.
Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by Retric on Wednesday August 05, 2015 @02:57PM (#10011988)
Ouch, it might be worth it to upgrade a 4 year old CPU.

Considering I actually have a four year old 2600K @4Ghz, it would be nice if they included an actual comparison.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by DuskStar on Wednesday August 05, 2015 @03:07PM (#10012076)
AnandTech's review has a much better set of comparisons to previous generation processors. (and if that isn't enough, there's always Bench)

http://anandtech.com/show/9483/intel-skylake-review-6700k-66...

Also interesting is that they found a decrease in gaming performance at 3.0ghz vs Haswell. Now, if Skylake could be expected to maintain higher frequencies than Devil's Canyon chips then the slight (3-5%) decrease could be overcome - but a Devil's Canyon i7 (the 4790k) has the same 4.0ghz base frequency as the new i7-6700K, and what looks like the same turbo frequencies.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by Retric on Wednesday August 05, 2015 @03:25PM (#10012201)
Looks like at base clock speeds it's a ~50% increase vs a 2600K. However, I have a ~20% OC so I really need to see how much the 6700K OC's. Still it's seems unlikely to be worth spending ~750$ for a new CPU, RAM, Cooler, and MB.
Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by Skunkleton on Wednesday August 05, 2015 @03:49PM (#10012345)
According to Anandtech, it is only a 35% increase relative to the base clocked 2600k :/. Also, DDR4 isn't yet a real improvement over DDR3.
Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by mmebane on Wednesday August 05, 2015 @05:13PM (#10012905)
I have a 2600k at 4.5 GHz (probably can go faster, since I haven't put much effort into overclocking). For almost everything I do, it's fine, but some games in Dolphin still push the limits. It's really annoying when something runs perfectly well most of of the time, but has occasional slight speed drops.

25% faster clock-for-clock would probably fix this in most of the games I care about, and that might be enough to get me to upgrade.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by pervycreeper on Wednesday August 05, 2015 @03:44PM (#10012309)
Indeed. Would also be nice to see a direct comparison between a typical OC 2600k (say 4.5 GHz) vs. their sample at max OC.
Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by CamperBob2 on Wednesday August 05, 2015 @03:40PM (#10012289)
It's truly disturbing how long Sandy Bridge has spent near the top of the CPU price/performance ranks, given how old it is. It's as if Intel just stopped trying back in 2010 or so.

I guess everything interesting has to run on a GPU nowadays.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by noir_lord on Wednesday August 05, 2015 @03:45PM (#10012319)
I have an i5-2500K at home and an i5-3570K at work, neither is overclocked and neither is what you could call slow, moving to SSD was a much bigger upgrade.

In all my years of building PC's I can't remember a time when a nearly 5 year old machine would still run all everything I wanted to run, on the one hand that's cool on the other barring some shakeup it looks like the days of must have upgrades every year seem to be halting (for now).

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by RobinL on Wednesday August 05, 2015 @04:53PM (#10012791)
Same. I was waiting for Skylake to upgrade but doesn't seem worth it; I'll probably wait for a 2x performance boost on the i5-2500k, which seems to be still a long way off. Although it seems disappointing perhaps I should be grateful I got lucky and chose the right generation last time I upgraded.
Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by vardump on Wednesday August 05, 2015 @03:58PM (#10012417)
Well, Haswell does have 2x integer and 4x FPU performance. A lot of potential in AVX/AVX2 is still untapped for now. It sure doesn't help only few bother upgrading...

Then again, I'm often memory bandwidth bound even when using just SSE. If the memory can't deliver enough data to work with, there's bound to be a performance ceiling.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by CyberDildonics on Wednesday August 05, 2015 @04:03PM (#10012447)
Be aware though that that 4x FPU number is very misleading, because it only applies if every instruction you are doing is a vectorized fma (fuse multiply add). AVX is massively untapped, but Intel's peak flops numbers based on SIMD fma are only true in the most technical sense.

Also, it is unlikely that you are actually memory bandwidth bound unless you are looping through linear memory on every core. It is fairly tricky to make useful software that is not memory latency bound.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by vardump on Wednesday August 05, 2015 @04:06PM (#10012467)
I know that. But I also know FMA is what you're almost always doing with a FPU, in terms of consumed clock cycles.

So I don't really think it's that misleading. It's the go-to instruction.

> Also, it is unlikely that you are actually memory bandwidth bound unless you are looping through linear memory on every core.

Well, that's what Intel vtune says. If I'm processing stuff at total bandwidth of 30 GB/s, I tend to believe it. Each core is dual issue, so with SSE you can process up to 32 bytes per cycle per core. When you have 4 cores at 3.5 GHz, that adds up. The CPU beast can consume an order of magnitude more data than DRAM can supply, even with just SSE. So you can do a lot of operations on the data and still be memory bound.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by CyberDildonics on Wednesday August 05, 2015 @04:11PM (#10012489)
> I know that. But I also know FMA is what you're almost always doing with a FPU, in terms of consumed clock cycles.

That is not a true generalization at all. Maybe you are doing image compositing, but fma instructions are not so heavily used that they can be thought of as the single workhorse of a processor.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by vardump on Wednesday August 05, 2015 @04:19PM (#10012539)
> but fma instructions are not so heavily used that they can be thought of as the single workhorse of a processor.

Well, indeed, a lot of cycles are lost for moving the data around, branching, waiting for memory. But when it comes to floating point computation, well, FMA is really common. In floating point inner loops it's just so usual to need to do "x := x + a * b".

I didn't say single workhorse of computer, but for DSP type of stuff FMA rocks. Dot product, matmul, even fft -- a lot of FPU heavy computation directly benefits from FMA.

Anyways, even without FMA, you can do a lot of ops per value and still be memory bound.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by mafuyu on Wednesday August 05, 2015 @03:24PM (#10012194)
@asanagi: You're shadow-banned as of 15 days ago.
Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by _stephan on Wednesday August 05, 2015 @03:50PM (#10012351)
Not any more?
Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by jkot on Wednesday August 05, 2015 @03:26PM (#10012208)
I have the same situation, not worth the upgrade. Maybe in 10 years there will be better CPU.

If you want upgrade, buy watercooling and overclock it.

Re:Intel’s Skylake Core i7-6700K reviewed: Modest gains from... by asanagi on Wednesday August 05, 2015 @03:04PM (#10012058)