News for hackers. Stuff that matters.

writtenabode

Re:Goodbye Big Five: Google on Tuesday January 29, 2019 @01:22PM (#19028625)
Northern Virginia
You can actually read the specification here: https://www.wirelesspowerconsortium.com/downloads/download-w...

As of at least 1.2.2 (April 2016) the Qi spec has supported 15 W through an Extended Power Profile

A Baseline Power Profile supporting transfer of up to about 5 W and an Extended Power Profile supporting transfer of up to about 15 W of power using an appropriate Secondary Coil (having a typical outer dimension of around 40 mm).

The issues you raise aren't solved by limiting transmit power - they are only solved by actually using Qi standard chargers. If you are using a faulty transmitter it can catch fire at 5W or 10W.

The Qi standard as of 1.1 has the receiver communicate back to the transmitter the amount of power it has received. The transmitter then calculates transmit efficiency based on the amount of power it is outputting. If the efficiency is too low the transmitter will fault with the assumption that it could be heating up a foreign object.

All Qi chargers already have a temperature sensor in them and any modern phone has many temperature sensors (MEMS sensors, SMPS, lipo battery charger). The Qi receiver already communicates back to the transmitter and can tell it to increase or decrease power. Having the Pixel 3 decrease charging rate if it noticed heating up would be trivial.