nszceta

There is no limit to the power grab. The only acceptable thing to do is to dig the trenches before it gets worse.

This is the founding thesis of the dead internet theory: https://forum.agoraroad.com/index.php?threads/dead-internet-...

For 5G enabled devices the medicine is to cut the antenna off

Managing AWS is a ton of work anyway

I have been trying to force LLMs to work with geometries for over a month and it's so hard. Even the best LLMs have an extremely poor sense of geometric relationships in my testing. I would also stay away from mesh based CAD like OpenSCAD and go straight for build123d which operates on real solid models (BREP): https://build123d.readthedocs.io/en/latest/index.html

*tranche

Intel people would point at SYCL if you told them this

It took me too long to understand the difference between the two so I'll leave it here for others. Octelium operates on OSI Layer 7 and Tailscale operates on OSI Layer 3 and 4.

Google partnered with European Center for Medium-Range Weather Forecasts (ECMWF) to build weather models. Which begs the question: why didn't it partner with NOAA on its home turf?

https://www.smithsonianmag.com/smart-news/google-reveals-new...

I am learning build123 and skipping OpenSCAD altogether

Author should consider going straight to G-CODE (skip the STL)

The original JPEG supports a lossless mode.

JPEG-LL refers to the lossless mode of the original JPEG standard (ISO/IEC 10918-1 or ITU-T T.81), also known as JPEG Lossless, and not to be confused with JPEG-LS (ISO/IEC 14495-1, Transfer Syntax 1.2.840.10008.1.2.4.80), which offers better ratios and speed via LOCO-I algorithm. JPEG-LL is older and less efficient yet more widely implemented in legacy systems.

The lossless mode in JPEG-XL is superior to all of those.

This is also my experience with attempting to use Claude and GLM-4.7 with OpenSCAD. Horrible spatial reasoning abilities.

I wrote a blog post about using nspawn from an Arch Linux host. The Arch Wiki shows more information about how to get a Debian base if you want that instead. Link to the wiki is at the bottom of the blog post along with more references.

https://adamgradzki.com/lightweight-development-sandboxes-wi...

There is already ~/.claude/settings.json

What is going on over there at Anthropic?

High quality Russian titanium is prohibited by sanctions they imposed on themselves so they resort to importing third rate Chinesium with fake qualifications

Your dream will evaporate when the newcomers self organize and disenfranchise you. This foolishness and lack of critical thinking will be ultimately resolved by nature itself.

Don't do this. Hypochlorous acid is bleach but acidified and much safer to the human body than bleach. Don't use bleach, it is hundreds or thousands of times more toxic to humans at the same HOCl concentrations. You can easily make hypochlorous acid with electrolysis safely or by mixing highly dilute bleach with highly dilute acid (vinegar) with a target pH range of 4-6. If your solution pH falls below about 4 there may be chlorine gas evolution which is generally undesirable. Above that level it is not significant. I recommend the electrolysis route for use in and around the body. The bleach and acid method is useful to make a general purpose deodorant and disinfectant. https://www.dstec.com.my/wp-content/uploads/2020/04/pH-for-H...

Hypochlorous acid is hundreds of times more effective than bleach as a biocide because it is uncharged and can far more readily diffuse past the lipid bilayer of microbes to wreak havoc. Somehow, humans are generally much more immune to these effects. Whereas 0.1 ppm HOCl can kill most bacteria it takes approximately 10,000 ppm to damage most human cells.

Yeah, hydrogen peroxide is more toxic than hypochlorous acid.

If you want to more or less permanently stop gum bleeding pre-brush with a dilute (50 to 200 ppm) solution of hypochlorous acid generated from vinegar acidified salt water (0.8-2%) with salt concentration (saline is 0.8-0.9%) then hit it with a $5 Aliexpress USB electrolyzer for about 30 seconds. The biofilms come right off, your toothbrush ceases to accumulate biological matter, and hypochlorous acid does not begin to show toxicity in keratinocytes until 10,000 ppm. It is extremely unpleasant in the mouth above 200 ppm so it is relatively easy to guesstimate.

Look no further than a basic hormone - leptin - to see how you can't give people more of it to lose weight while in fact leptin is the main mediator of obesity. Modern medicine hasn't produced a magic leptin pill to stop obesity because the biology is very complicated. You can't just inject leptin and lose weight (unless you don't produce leptin if you were severely damaged in an accident).

> can be tracked back to source

Not sure I believe that it can be done beyond a reasonable doubt. I still don't see what evidence there is that these things are Chinese. It's probably speculation and nothing more. It might still be true, but the attribution is likely highly speculative.

It does make sense to completely cripple critical infrastructure initially with plausible deniability.

Combine this with the Ohio derailment and the uncaught substation snipers which knew an awful lot about what equipment to take out.

Derailment is a powerful sabotage tool. Americans were caught attempting it in Russia years ago. https://tass.com/politics/1313063

They are trying to weaken infrastructure by making taxpayers bleed time, money, and effort.

How would they know who launched it quickly if it was detected so late?

What if this balloon is carrying a small yield nuclear payload or dirty bomb?

Don't forget the Ohio derailment. Few days ago a train carrying hazardous materials derailed in East Palestine, Ohio. Crews have since been burning off the toxic chemicals. Claims that air/water quality are safe are turning out to be false. Evacuation orders are even being lifted as people return to the area.

This may also be an asymmetric attack on critical infrastructure by foreign agents in country.

Read post #2

https://bluelight.org/xf/threads/scopolamine.765088/

You can uninstall for all users using the adb helper tool I don't know the command line to do it manually.

Yes it's not removed but at least the guarantee it won't run is quite strong.

But they aren't done with the $4000 a month mortgage with dropping equity value that's holding them hostage.