dranudin

I run a stack with garbage collection for most of my tasks: I just keep things I need to do in my head, and if I think of it a lot it has references to it. If I stop thinking about it it will eventually be purged by GC :D

I wonder what is the longterm plan of those that want to ban the party. We have a situation where (depending on the state) more than 40% of the voters vote AfD. If you ban the party, where would one expect the current voters to go to? I don't think they would vote center-left then...

Yes. With Fortran 90 most of the real archaic stuff was already gone. And they keep publishing new standards.

I wrote Fortran for my first job as a software developer in 2018 for simulation solvers. Still like the language! Modern fortran is very very fast and much nicer to use than C for linear algebra. So in my opinion for numerical calculations it remains the best language, even today. Happy Birthday!

Yes, buuut: I think we are already really close to that for a long time. You could learn a lot just from internet and youtube. But most people, I feel, just do not like to neither do plumbing/diy nor learn about it. Like if I tell people they can save hundreds of € by changing their own brake pads and that it is really easy to diy, they just shrug and go to the mechanic. So I am not sure if AI will really increase the percentage of people willing to learn these skills and do repairs etc

That was not my point. Sorry if I did not make it clear enough: The point is, the mesh is a completely separate entity. It is an attempt to make a copy of the CAD geometry. Whereas with IGA you can actually calculate on the CAD geometry itself (at least for easy geometry without trimmed surfaces).

Normal finite elemts does not care. The mesh ist just put on your 3d body that can be an stl or a step or whatever. The FEM only knows the nodes and nothing else. The mesh geometry is completely separate from the CAD file.

Now there is a method called Isogeometric Analysis (IGA) that was meant to improve this. It uses NURBS functions (just like CAD) for the shape functions of traditional FEM. The idea was that now, if you have NURBS describing the CAD geometry you can skip meshing and just directly calculate on the real geometry. But it did not catch on. The reason being basically, as far as I remember, was that most CAD geometries of interest are not pure NURBS. But they are operations of NURBS (think cube minus some other cube - trimmed surfaces). And IGA has problems with that.

This is a problem that openSCAD will probably also not be able to overcome. But maybe at times it might be easier to create NURBS geometries without trimmed surfaces. But most probably that cannot be done in most cases of real world significance.

This is still unbelievable to me, up to this day. If the opposition choses to run for office with a moron, couldn't you at least find a candidate that is not demented.. You can't make this up..

Yes that is a real problem at work. A lot of stuff is done in containers or virtual devices and jetbrains remote developping workflow takes too much time due to this transfer. VsCode is much faster there.

yes. They used it for a heart surgery on a new born that I know.

Once upon a time adidas made shoes that were wide enough for me. Then somehow they decided to make them narrower and I had to search for wider shoes. The search was very difficult, as it seems that most shoe producers do not produce actually foot-shaped shoes. I bought my first pairs of Altra half a year ago, and I am very happy! The fit is really great. I will not switch to anything else, as long as they continue producing in this shape.

> Perhaps the tendency to complain is a necessity to achieve a high level of efficiency.

I am pretty convinced about that. Especially after having lived and worked in other countries where people like to complain less. If people will just accept and not complain, problems also will not get fixed.

I was once in a museum in Bolzano, Italy. And they had the ice man mummy there (we call him Ötzi). He died like 5000years ago. And his "axe" was made of copper from some mine very far away. So even this guy probably did not know how everything he had was made. There is a theory that he was probably very rich. So maybe less rich people were more in touch with what they owned. But still I found it fascinating that even so far back people relied on technology and materials that they didn't really know about.

The A/C cannot keep up the load, due to the exteme heat. So they decided to just not cool one part of the building, to be able to keep cooling the other part .. It is now interesting who was in which part ;)

I don't think it is changing the goalpost. The law prevents more than half of Germany's inhabitants from installing ACs, because they are renters. Also landlords cannot just install AC just fine. If you just own an appartement, you need the consenst of all other owners in the building. This is also a law. Therefore, practically no landlord will agree to the request to install outside AC, unfortunately.

There is, unfortunately. You cannot install AC, with an outside unit, without approval of your landlord. Lots of people are renting, e.g in Germany. Of course, one can get an indoor unit an seal the window. But it is heavy and takes up a lot of space in a small urban rental..

Yes :D

I can second this. Our company and department was all-in on AI. And since the token-based pricing came in, we got an email from IT that tried to explain that most developers don't know how to choose models and that the cheap models should be good enough for most of our work ..

Old people will be the majority for the foreseeable future, though. To be honest, the only strategy that I currently see for young people is waiting and growing old, unfortunately..

I got a dustmite allergy directly after a Covid infection. Also, I got no proof but it made me suspicious if there could have been a connection..

A guy at my company (very old company, we need to maintain our software for 30+ years) gave a presentation about how they used opus 4.6 to onboard people, like giving new team members access rights etc. Then another guy (even higher in management) proposed using a team of agents for that.. It's getting pretty wild

They do heavily outsource to India, though. At least for their electronic control units..

They are guessing much more than computer scientists would think, typically . A structural engineer does not know: the peak wind force, what the ground under the bridge is really made of, what the actual tensile strength at the weakest piece of material is, what the exact force on the screws were at time of fastening (and after), etc... Heck, they don't even know if euler bernoulli beam theory is actually right about the existence of a neutral axis..They just take their best guesses, add generous safety factors and have the bridge inspected regularly ..

However, people born before 2008 smoking around you, affects you, as well. If they want to protect people they need to ban it for everybody..

If there is a jump of inflation in the US it might very well spread to my place (EU), as well. It is interesting for me, as I am interested in economics and finance. So it sparked my curiosity, at least.

I very much hate Schufa for the way they calculate your score (which until very recently was not even disclosed). But hey, at least they don't sell my income data to random private companies. In fact they do not have my income. Just credit related stuff. I demand an overview from them every 3 months that they have to physically mail to me, just to annoy them..

My grandpa (ww2) was one of them. He helped my father dodge the draft, when he was supposed to go to military service.

sure, nobody would ever speak English as a second language ;)

It'd be great if this could one day be a real alternative to Elsevier. Today, professors and postdocs are doing the peer-review for Elsevier, for free. They can do that because they get a paycheck from the government (through university and grants). Then, the governments pay for Elsevier access through university libraries, ontop of that. It'd be much more efficient, if everybody could just publish and subscribe for free on a publicly funded platform.

In Germany. I have a degree in mechanical engineering and am thus allowed to call myself an engineer, even though I write software professionally. Colleagues who have studied computer science cannot, as it is not considered an engineering, but a science degree. This is why most people talk about "software developers" and not about "software engineers" (in German) to avoid this problem. That being said, most people would not actually care.