buster3000
https://www.omnicalculator.com/physics/kinetic-energy
https://en.wikipedia.org/wiki/MV_Dali#Description
"Description
Dali is a Neopanamax container ship[7] with an overall length of 299.92 metres (984 ft), beam of 48.2 metres (158 ft 2 in), moulded depth of 24.8 metres (81 ft 4 in), and summer draft of 15.03 metres (49 ft 4 in). Her gross and net tonnages are 91,128 and 52,150, respectively, and her deadweight tonnage is 116,851 tonnes. Her container capacity is 9,971 twenty-foot equivalent units (TEU).[2][8]
Dali is propelled by a single low-speed two-stroke crosshead diesel engine coupled to a fixed-pitch propeller. Her main engine, a 9-cylinder MAN-B&W 9S90ME-C9.2[9] unit manufactured by Hyundai Heavy Industries under license, is rated 41,480 kW (55,630 hp) at 82.5 rpm.[2] Her service speed is 22 knots (41 km/h; 25 mph).[5] For maneuvering in ports, Dali has a single 3,000 kW (4,000 hp) bow thruster. Electricity is generated onboard by two 3,840 kW (5,150 hp) and two 4,400 kW (5,900 hp) auxiliary diesel generators.[4] "
I've been following this newsletter for a while as I have a passing interest in (photographic/cinematic) lens design.
My X1 Carbons (2nd gen) 1440p is the bare minimum for me and thats almost 10yrs old!
A simple makefile, avr-gcc, avrdude and the attiny85 datasheet is all you need. He has the programmer I use judging by his description.
Makefile i use for my projects https://pastebin.com/pntGaWk7
edit: I think he isn't using the same programmer. He's using that annoying one where you have to either unplug + plugin before each flash with arduino or ground the permanent reset pin. Chuck it and get a proper avr programmer.
I came across an FDA-approved device called lenire. Reviews seem hit or miss, but if I'm feeling flush I may try it. I can mostly put up with my tinnitus these days but it can get quite frustrating when tired & I want to sleep.
Classic behaviour by old red-trousers.
Then I saw who I wrote it.
My almost 2decades old Nikon V-ED, which I bought when it came out, still outperforms the most expensive flatbed you can buy now (V850-pro), which I also have.
If you're interested https://www.filmscanner.info/en/FilmscannerTestberichte.html... educate you without having to buy anything to find out for yourself.
Because of that I only use the V850 for 4x5 and 120. It's a waste of time for 35mm even if it's quicker to scan multiple frames.
Come on...