bciuca
Re:Dumping an AES key from a MyQ garage opener to stop rebooting when ...
on Thursday November 19, 2026 @07:35PM (#50568624)
Not sure what NOPs/WTD petting would be buy me since I needed most, if not all of the functionality of the gateway. The PIC18 MCU is very limited in capabilities so it's not doing much of anything besides ethernet and controlling the radio.
I started this project mainly as a learning exercise with a stretch goal of replacing the firmware altogether to play nice with HomeKit. I was able to rewrite the ethernet stack and some of the radio stack and rf protocol but there was a lot more optimization to do to make everything fit in storage and RAM. Reverse engineering the server-side was the path of least resistance.
Re:Garage Door Spam
on Thursday November 19, 2026 @07:02PM (#50568363)
I ended up sinking that unhealthy amount of time into it this over the summer :). I already had an ethernet based 828LM myQ gateway that I got for my gate a couple years ago and ended up dumping the firmware, extracting the TLS-PSK, and reverse engineered the MQTT protocol to bypass the myQ service altogether. While the myQ app is a dumpster fire, the 828LM is a pretty simple device that does nothing more than act as a network to myQ rf bridge. With the cloud service out of the loop, sending open/close from HomeKit feels instant. I recently wrote about the process: https://bciuca.com/blog/homekit-enabled-myq-garage-opener/
And thank you ratgdo for a lot of the leg work that was applicable to reverse engineering the rf protocol.
Re:Dumping an AES key from a MyQ garage opener to stop rebooting when ...
on Thursday November 19, 2026 @02:03AM (#50556875)
Nice work! I did something similar but with the intent of creating a Homebridge plugin for HomeKit support and bypassing the myQ service altogether. https://bciuca.com/blog/homekit-enabled-myq-garage-opener/