News for hackers. Stuff that matters.

_-af-_

It's actually not very flexible. I've seen field trials of this. It is an interesting concept but not very implementable.

You could do the same data transfer by having the phone display a barcode and use a barcode scanner.

They claim that outfitting an existing system with an NFC reader costs $100 to $800. Which is not true. An NFC dongle is under $20. They are looking at costs of NFC stand alone terminals (w/ LCD display, etc.) and that high cost is due to secure element and certifications those have to go through to work w/ Visa/Mastercard networks.

It is an interesting technology and has its uses but not as an NFC replacement.

Re:Google translate bug? server = motherfuckin on Sunday June 19, 2011 @08:26PM (#2672392)
اللتي

التي = which/that in this context.

I don't know why Google Translate is picking up اللتي as motherfuckin

Re:Project PERRY - An enhanced stored-value card on Monday June 13, 2011 @01:04AM (#2648192)
I'm not trying to be a naysayer. I'm trying to give you info because we've done a number of RFID and e-ink designs and I'm very familiar with both technologies. Neither of our designs involve a card.

BTW, some credit cards Visa is doing a field trial with have a display but it is LCD COG + Polymer battery for exactly the e-ink restrictions I've laid out below.

1. To fit inside a card you'll need wafer level thickness. Any package will be at least 2mm thick.

2. The screen will break if you put any force on it. I have dozens of samples of this to show you. Get a kindle, take the screen out, use a a dremel to cut it down into a card size, now put it in your wallet and sit on it.

3. That number is actually a low ball. We're seeing close to 2mW for switching. 1mW is from the datasheet. We turn on the controller, update the scree and go back to sleep -- close to 2.8mW gone. Also switching requires +25, -25 and a VCOM, I'd love to see how you're going to put a dual supply charge pump in such a small package and power it from a coil.

4. --

5. Well the pricing we have is for 100K volume but maybe you guys can get it down to couple of cents.

6. E-Ink requires custom waveforms which you can only get under license from PVI. They don't even give it to Epson, Motorola, or TI. You put the controller then e-ink gives you a file w/ the waveforms for that batch of screens.

Also, the e-ink display + substrate is much thicker than you think. Even their segmented display stuff which has much simpler requirements can't be driven off of what you want to drive it off of.

No one minds a challenge, provided the circumstances are realistic. Anyhow, good luck with the project.

Re:Project PERRY - An enhanced stored-value card on Sunday June 12, 2011 @09:47PM (#2647841)
Couple of major issues with this (as an EE who has designed products involving both RFID and E-Ink):

1. E-Ink requires a controller -- you can't get those at wafer scale

2. E-ink has a hard plastic substrate, you can't have it on a flexible substrate therefore it will break very easily under pressure.

3. E-ink requires 1mW to switch + power to the controller chip... RFID can't provide that much power.

4. You can use an NFC equipped phone to do the same thing, much easier (but that has its own issues)

5. E-ink is expensive. It will cost at least $20 in volume for a small display the size of your CC -- even a 120x72 strip will be about $10.

5. You can't easily interface the RFID chips with an e-ink display. Those RFID chips (MiFare DESFIRE, etc.) are all effectively enhanced memories. There is no processing power that you can control to interface w/ an e-ink display.

You can't easily 'emulate a cell tower'.

To verify that the device isn't indeed transferring any data as part of any background Apple process they should put it on WiFi and monitor traffic through the router. It should be zero.

I'm logically assuming that any background process that would transfer data over 3G would also do it when on WiFi network.

They could also get a data modem from AT&T and test it by connecting to the tower but not transferring any data. If AT&T is overestimating data transfers or has phantom data then it would be across the board and would also show up on transfers through their data modems not just their iPhone plans.