News for hackers. Stuff that matters.

Xpol

Re:New atomic clock loses only one second every 300B years on Monday February 21, 2022 @01:30PM (#30419026)
You're right, the techniques in NMR like Rabi and Ramsey spectroscopy, spin echoes are all used in atomic clock experiments too.
Re:New atomic clock loses only one second every 300B years on Monday February 21, 2022 @03:19AM (#30413182)
After strontium atoms coming from an oven (usually at 400-ish degrees) reaches the main chamber, they're trapped via both optically (via lasers) and magnetically (there's coils surrounding the chamber), which we called magneto-optical trap, or MOT. For strontium, there're two stages of MOT, one is a blue (461nm) MOT which cools and traps hotter atoms into temperature of ~mK, and the second stage is the red (689nm) MOT that further cools the atoms into ~uK range. A MOT typically consists of 3 laser beams at different directions, and retroreflected on the other side after hitting the atoms (so 6 beams effectively). Some MOT can be done with less lasers. All 3 pairs of lasers (and 2 MOT, so 6 pairs) have to align perfectly so that they all hit the same point of intersection within the chamber.

To align these lasers, one method is to shine another 461nm pulse to the chamber and check for fluorescence signal via a photodiode or camera located on the other side of the chamber. Since the beams are generally much larger than the atomic cloud itself, as long as you hit something, it is easy to optimize the signal. For a blue MOT with very high atom number, you can even see a small blue bulb suspending in the mid-air inside the chamber, which could serve as a rough reference to start with.

So now atoms are trapped into the red MOT, you then turn off the red lasers while having the lattice laser (at 813nm) on, so the atoms are loaded into the optical lattice. Using the same method, you take a fluorescence image at the end of the experimental sequence to check if there's any signal. Note that the position of the red MOT depends on both the laser alignment and magnetic fields, so one can either (1) align the lattice beam, in this case, a vertical beam from top to bottom and retroreflected or (2) adjust the magnetic fields to fine-tune the red MOT position. It's an iteration of fine adjustments and looking at images.

Another way to align the lattice to the atoms is instead of shining lattice beams to the atoms, you first send red light through the same fiber. When they hit the atoms in the red MOT, the red light will excite the atoms so you won't see anything now with the fluorescence imaging (as they no longer in the ground state that responds to the blue transition). We call this "the killing beam" as the name suggest. Once you know the rough alignment, switch it back to lattice laser and do the optimizations until you see atoms loaded into the lattice (the distribution and spread of the atom ensemble are different when viewed with camera for atoms that are still in red MOT vs loaded into lattice).

Re:New atomic clock loses only one second every 300B years on Sunday February 20, 2022 @03:05PM (#30408845)
There're problems with increasing atom number. It is true that more atoms will allow one to resolve QPN easier, more atoms make clock rotations (along the Bloch sphere) much harder, as for a spin-squeezed clock doing Ramsey sequence, you need at least two pi/2 rotations to rotate the squeezed state.
Re:New atomic clock loses only one second every 300B years on Sunday February 20, 2022 @05:46AM (#30404774)
What the MIT group achieved was implementing spin-squeezing to clock operation, but their results are not QPN-limited (in fact, they made it above the SQL, so they actually make things worse instead of making it better) [1].

They attributed their major obstacle as their laser phase noise, and they claimed if they subtract the estimated laser noise from the result they would get sub-SQL. But hey, that's not how things work. If you think you can make it, you just make it.

[1] : https://www.nature.com/articles/s41586-020-3006-1

Re:New atomic clock loses only one second every 300B years on Sunday February 20, 2022 @05:40AM (#30404745)
Yes, LIGO has already implemented squeezed states in their measurements. What I'm referring to is making a spin-squeezed atomic clock with enhanced metrological gain compared to QPN limit. There're several groups working on it and so far no one has succeed.
Re:New atomic clock loses only one second every 300B years on Sunday February 20, 2022 @02:40AM (#30403978)
They are not mutually exclusive. There're groups that are developing portable atomic clocks, and then we have this group that are pushing the frontiers. While not in everyday devices, cesium/ rubidium clocks which are less accurate but there're already commercial products that are used in observatories around the world. The standard time of your country might already be referenced to one of these.
Re:New atomic clock loses only one second every 300B years on Sunday February 20, 2022 @02:23AM (#30403907)
A simple way of thinking it is consider laser as waves, they act like harmonic potentials (like sine curves) with crests and troughs. Atoms that are inside the potentials are trapped, like a ball in a deep well. Atoms trapped in optical lattices have a lifetime with a time constant which the population of trapped atoms keeps decreasing, but the timescale is like tens of seconds, so the atom loss is not significant when the clock interrogation is in milliseconds.

In this paper the lattice is a 1D vertical lattice, so you can think of atoms being trapped in a huge stack of pancakes.

Re:New atomic clock loses only one second every 300B years on Sunday February 20, 2022 @02:12AM (#30403868)
Yes, in fact, the current state-of-the-art atomic clocks are hitting a limit called the standard quantum limit (SQL) of the quantum projection noise (QPN). Basically, atomic clocks operate by probing atoms with an accurate local oscillator, in this case, the laser, to drive the clock transition (here, 698.446nm or 429.228 THz). In this two-level system (a ground state, g and excited state, e), you can think of the measurement yields a "pointer" that points the state of the system (which is a superposition of g and e, which is related the the fraction of atoms in the ensemble being excited, i.e. the excitation fraction), however, such measurement is not certain, hence QPN.

However, there're workarounds to beat this SQL. One approach people are working on is called the "spin squeezing", which, one can think of the uncertainties of a measurement mapped onto a 2D plane, for simplicity, a circle. Spin squeezing is used to improve the uncertainty in one axis while sacrificing the other, like squeezing the circle into an eclipse. There's a group in MIT which attempted to show metrological gain from spin squeezing in 2020, which they failed.