Volodesign
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Tuesday November 15, 2011 @10:39AM (#3238551)
The goal of the project is to spark infrastructure independent energy solutions - the stirling engine is flexible enough to run off of any type of heat (gas, wood, solar, etc). Stirlings can be very efficient, but, on top of that you're eliminating the transmission loss. You'd need both, some type of alternator, and some type of heat capacitor (fire box) to get the steady feed your talking about, but the first step is to complete the engine development.
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Tuesday November 15, 2011 @10:30AM (#3238511)
I don't know of anyone providing a working engine for $250 at this time - you can find desktop models that run off of coffee cups but don't do real work. The industrial models cost in the tens of thousands. Give the Volo a shot - we hope to have it completed by spring.
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Tuesday November 15, 2011 @10:27AM (#3238497)
Thats what we saw and why we started the project - just not enough solutions for real world requirements. The engine itself is somewhat simple, its the thermodynamics that are tricky - There are only a few moving parts, no spark plugs, no oil, no valves and works off of any kind of heat.
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Monday November 14, 2011 @02:34PM (#3235323)
Yes, I'm the typist - just trying to lighten the mood a bit.
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Monday November 14, 2011 @10:46AM (#3234376)
Correct - this is just the piece that turns heat into work. The rest electrical system and fire box / solar concentrator comes latter.
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Monday November 14, 2011 @10:43AM (#3234357)
There is no money back guarantee, it is a gamble, although we feel its a pretty good gamble.
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Monday November 14, 2011 @10:41AM (#3234352)
We've given some thought to this - one idea we are kicking around is embedding a heat capacitor in the engine, kind of like a battery for heat so that we can even out the heat input to the engine - The heat capacitor coule be a type of insulated molten salt bath.
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Monday November 14, 2011 @10:38AM (#3234340)
Appreciate the feedback. I'm going to have to give that typist a tough tongue lashing !
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Monday November 14, 2011 @10:27AM (#3234309)
Your right, there would need to be a storage device in the system - this is just the first piece that coverts the heat to work - The temperature range we are designing to is about 420 degrees F hot to 100 degrees F cold. Think of it as a small outdoor appliance. It would need some type of fire box for heat generation - we are outlining a small gassifier for bio mass but that will come latter.
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Monday November 14, 2011 @10:22AM (#3234289)
Lets hope not - we did complete a working prototype, proving out the mechanics, linkages, and feasibility. We are pretty close to budget on the full sized model - bearings may take us slightly over the $100 mark.
Re:Kickstarter project for $100 - 1 kW - stirling engine
on Monday November 14, 2011 @10:19AM (#3234280)
Hi, thanks for the question -
The fuel source intended for the Volo Engine is some type of biomass - for the biomass the plan is to use a gassifier to get the heat out of the biomass. Solar is a good possibility, but not enough solar in the northern part of the US to make enough heat.